Wise watering: Use these tips to maximize absorption and conserve

October 9, 2015

Beating the heat

When your whole yard is parched by dry weather and plants that wilted in the  midday sun  are still drooping the next morning, they are in dire need of irrigation. Knowing when and how much to water is key to achieving that lush, green look you are aiming for.

Wise watering: Use these tips to maximize absorption  and conserve

The right tool for the job

If water use is not restricted in your community, running a sprinkler is the easiest solution. However, watering by hand may be your only alternative. Garden supply stores stock an array of adjustable garden-hose nozzles that allow you to change the force and stream of water in keeping with the task at hand, making it possible to switch from a gentle shower to a misty spray. If you keep a number of plants in containers, you will love a watering wand. It is a sprinkler-type nozzle with a long handle that screws onto the end of your hose. A watering wand makes it easy to reach plants growing in high hanging baskets and other hard-to-reach areas.

Timing is everything when it comes to absorption

Whenever you water your garden plants, your objective should always be to soak the root zone rather than the foliage. Fungi that cause leaf-spot diseases become active when leaves are damp, so keeping leaves dry helps to prevent these problems.  For this reason, it is often best to water early in the morning, so that water will soak into the soil before temperatures rise and wet leaves can dry before the cooler evening hours.

In arid climates, where disease is not a problem, water in the evening to reduce evaporation, giving plants all night to soak up water before facing drying wind or hot sun the following day.

Take this tip for watering during community restrictions

Gardeners are usually advised to provide plants with 2.5 centimetres of water per week during droughts. It may seem odd to measure the output of your sprinkler, but it is easily accomplished.

  1. Draw a line 2.5 centimetres (one inch) from the bottom of a shallow container, such as an empty margarine tub or tuna can.
  2. Set the container where sprinkler water falls into it when you run the sprinkler.
  3. When the water in the container reaches the line, move your sprinkler and the emptied can to a new area and repeat the process until the garden is covered.

Grab a chair,  a glass of lemonade and reap the benefits of your lawn.

The material on this website is provided for entertainment, informational and educational purposes only and should never act as a substitute to the advice of an applicable professional. Use of this website is subject to our terms of use and privacy policy.
Close menu